Pozzetto Gronda - Pozzetti per uso idraulico e/o elettrico

Items in polypropylene (PP) for the collection and outflow of water coming from gutters.
Available in the round inlet type in the diameters 80 mm and 100 mm and in the square inlet type in the sizes 80mm x 80mm and 100mm x 100mm; outlet drain diameter 100 mm for both types.

Chiusino Sifonato - Pozzetti per uso idraulico e/o elettrico

Artefacts in polypropylene (PP) for the collection and outflow of water coming from floor and water basins. Available in the sizes 10cm x10 cm, 15cm x 15cm, 20cm x 20cm, 25cm x 25cm and 30cm x 30cm; outlet drain diameters 40 mm, 50 mm, 80 mm, 100 mm and 110 mm.

Pozzetto Riccini - Pozzetti per uso idraulico e/o elettrico

Monolithic inspection artefacts in polypropylene (PP) for underground electrical and/or telecommunications installations (branches, earthing, equipment containers) or for civil underground installations (or for underground civil system installations (drain connections, inspection wells), equipped with pre-traced concentric shapes on the vertical walls and removable bottoms. Available in the sizes 20cm x 20cm, 30cm x 30cm and 40cm x40 cm (grey and/or green) or 55cm x 55cm (only grey).
Full range of inspection wells, grating, frames, accessories and seals and nuts kits.

Cavidotto rigido in pvc - Cavidotti

Solid wall pipes (conduits) in rigid non-plastic coated polyvinyl chloride (PVC-U) for the passage of cables in electrical installations; junction with adhesive-sealed smooth socket coupling. Available in the external diameters DN/OD from 80 mm to 200 mm, in the classes L 450 N (only upon request and for quantities to be agreed) and N 450 N; in 3 m bars. Conform with EN 50086-1:1993, and with EN 50086-2-4:1994+A1:2001.

Raccordi a saldare e a compressione

Fittings and accessories in polyethylene (PE), thermoplastic, brass, or composite materials for pipes in polyethylene (PE) for pressure pipes. Available, according to the type, in the external diameters DN/OD from 16 mm to 400 mm. The range includes electro-weldable fittings, fittings for butt welding, compression fittings, reducers, bracket clamps, collars, transition fittings, L-pipes, T-pipes, flanges, caps, valves, bolts, accessories.

I.I.P.uni
PVC fognatura UNI EN 1401 Blusewer

Solid wall pipes in rigid non-plastic coated polyvinyl chloride (PVC-U) for non-pressure underground drain pipes; spigot joint and ringed socket with pre-fitted elastomeric seal. Available in outer diameters DN/OD from 110 mm to 1200 mm, in classes SN4 KN/m2 and SN8 KN/m2; in 6 m or 3 m lengths.
Complete range of pipe fittings. Compliant with UNI EN 1401-1; iiP UNI marked.

Simple Crown - Tubi e allacci per sistemi di scarico fognario

Universal connection system featuring a high hydraulic sealing, body made in polypropylene (PP), rubber parts in EPDM, steel screws for sewage utility coupling, connections to inspection wells, implementation of drainage gratings, inspections wells etc. Suitable for connecting smooth or corrugated wall pipes, normalised on the external or internal diameters, made of polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC). Available in the DN/OD 160 mm external diamter or in DN/ID 200 mm internal diameter for connections to pipelines or wells featuring an inner or outer diameter between 250 mm and 1200 mm.

I.I.P.uni
Tripplo+ - Tubi e allacci per sistemi di scarico fognario

High modulus polypropylene, triple-layered wall pipes (HMPP) for non-pressure underground drain pipes; spigot joint and socket with pre-fitted elastomeric seal. Available in outer diameters DN/OD from 125 mm to 415 mm (including DN/OD 208 mm, 260 mm and 312 mm), in classes SN8 KN/m2, SN12 KN/m2 and SN16 KN/m2; in 6.20 m, 3.20 m and 1.20 m lengths. Complete range of pipe fittings.
Conform with UNI EN 13476-1, UNI EN 13476-2 type A1 and ONR 20513; with iiP UNI marking. Suitable for installations at -10°C.

I.I.P.unizik
Kingcor - Tubi e allacci per sistemi di scarico fognario

High modulus polypropylene structured wall pipes (HMPP) for non-pressure underground drain pipes; spigot joint and ringed socket with pre-fitted elastomeric seal. The compact wall seal is made at the ends.
Available with coextruded double wall (corrugated on the outside/smooth on the inside) in inner diameters DN/ID from 200 mm to 600 mm, in classes SN4 KN/m2 and SN8 KN/m2; in 6.20, 3.20 m or 1.20 m lengths. Complete range of fittings specific for great diameter inspection wells.
Conform with UNI EN 13476-1 and UNI EN 13476-3 type B; with iiP UNI marking.

Monday, 12 September 2011 14:37

Research and Development

Written by Administrator

Research and development are essential for a company like RICCINI that, deeply rooted in its tradition of quality and reliability, has always focused on innovation and research of materials and products that increasingly meet the demands of its customers. The achievement of these ambitious goals must be integral part of a modern,

efficient laboratory, equipped with suitable equipment and capable of ensuring complete control of production processes, starting from the raw materials up to the attentive assessment of the process parameters and the inspection of finished products. RICCINI's P/C/C Laboratory, which also collaborates on research projects with external bodies, is able to ensure perfect compliance of the marketed products with current standards

<< Start < Prev 1 2 3 4 Next > End >>
Page 4 of 4
Powered by: AFB Net Group S.r.l.

Questo sito utilizza cookie che ci aiutano a fornire i nostri servizi. Continuando la navigazione, accetti il nostro utilizzo dei cookie. Per maggiori informazioni, vai alla pagina con l' informativa estesa.

Accetto cookie da questo sito.