1. Pipes and fittings for sewer drainage systems

Piping systems, fittings and technical couplings in PP, PE and PVC for installations for the disposal of waste water; they can be coupled and interconnected between each other and with any other material.

 

Go to product: Kingcor | Tripplo+ | Simple Crown | Superfluid | Sedici Plus | PVC Fognatura UNI EN 1401 (Blusewer)

I.I.P.unizik
Kingcor - Tubi e allacci per sistemi di scarico fognario

High modulus polypropylene structured wall pipes (HMPP) for non-pressure underground drain pipes; spigot joint and ringed socket with pre-fitted elastomeric seal. The compact wall seal is made at the ends.
Available with coextruded double wall (corrugated on the outside/smooth on the inside) in inner diameters DN/ID from 200 mm to 600 mm, in classes SN4 KN/m2 and SN8 KN/m2; in 6.20, 3.20 m or 1.20 m lengths. Complete range of fittings specific for great diameter inspection wells.
Conform with UNI EN 13476-1 and UNI EN 13476-3 type B; with iiP UNI marking.

I.I.P.uni
Tripplo+ - Tubi e allacci per sistemi di scarico fognario

High modulus polypropylene, triple-layered wall pipes (HMPP) for non-pressure underground drain pipes; spigot joint and socket with pre-fitted elastomeric seal. Available in outer diameters DN/OD from 125 mm to 415 mm (including DN/OD 208 mm, 260 mm and 312 mm), in classes SN8 KN/m2, SN12 KN/m2 and SN16 KN/m2; in 6.20 m, 3.20 m and 1.20 m lengths. Complete range of pipe fittings.
Conform with UNI EN 13476-1, UNI EN 13476-2 type A1 and ONR 20513; with iiP UNI marking. Suitable for installations at -10°C.

Simple Crown - Tubi e allacci per sistemi di scarico fognario

Universal connection system featuring a high hydraulic sealing, body made in polypropylene (PP), rubber parts in EPDM, steel screws for sewage utility coupling, connections to inspection wells, implementation of drainage gratings, inspections wells etc. Suitable for connecting smooth or corrugated wall pipes, normalised on the external or internal diameters, made of polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC). Available in the DN/OD 160 mm external diamter or in DN/ID 200 mm internal diameter for connections to pipelines or wells featuring an inner or outer diameter between 250 mm and 1200 mm.

Fluid
I.I.P.uni

Fluid - Tubi e allacci per sistemi di scarico fognario

Double structured wall pipe in high density polyethylene (HDPE) for underground sewage systems not under pressure; corrugated outside wall, smooth inside wall. Ring socket junction system with pre-inserted elastomer gasket; high hydraulic tightness. In bars and available in the SN8 and SN4 series. Complete range of fittings; compatible for coupling with lines with sleeve junction.

 

Sedici Plus
I.I.P.uniuni

Logo Sedici Plus

High modulus polypropylene structured high-resistance wall pipes (HMPP) for non-pressure underground drain pipes; spigot joint and ringed socket with pre-fitted elastomeric seal oriented towards the flow direction. The junction is featured at the ends.

Available with coextruded double wall (corrugated on the outside/smooth on the inside) in outside diametres DN/OD from 200 mm to 630 mm, in SN16 KN/m2 class; bar length: 6 m. Complete range of fittings and large-diametre inspection wells.
Compliant with EN 13476-3 and UNI EN 13476-3; with iiP UNI and PiiP marking.

 

PVC Fognatura
I.I.P.uni
PVC fognatura UNI EN 1401 Blusewer

Solid wall pipes in rigid non-plastic coated polyvinyl chloride (PVC-U) for non-pressure underground drain pipes; spigot joint and ringed socket with pre-fitted elastomeric seal. Available in outer diameters DN/OD from 110 mm to 1200 mm, in classes SN4 KN/m2 and SN8 KN/m2; in 6 m or 3 m lengths.
Complete range of pipe fittings. Compliant with UNI EN 1401-1; iiP UNI marked.

Powered by: AFB Net Group S.r.l.

Questo sito utilizza cookie che ci aiutano a fornire i nostri servizi. Continuando la navigazione, accetti il nostro utilizzo dei cookie. Per maggiori informazioni, vai alla pagina con l' informativa estesa.

Accetto cookie da questo sito.